Figure 1-1 ftServer 27x0, 47x0, and 64x0 Systems

Figure 1-2 ftServer 27x0, 47x0, and 64x0 Systems: Front View

Figure 1-3 ftServer 27x0, 47x0, and 64x0 Systems: Rear View

Figure 1-4 CPU-I/O Enclosure: Interior Components of ftServer 2700 or 2710 Systems

Figure 1-5 CPU-I/O Enclosure: Interior Components of an ftServer 4710 System

Figure 1-6 CPU-I/O Enclosure: Interior Components of ftServer 4700, 6400, or 6410 Systems

Figure 3-1 System Front Panel LEDs

Figure 3-2 CPU-I/O Enclosure LEDs and Buttons (Bezel Removed)

Figure 3-3 Internal Disk Drive LEDs

Figure 3-4 Ethernet and VTM Ports: Status LEDs

Figure 3-5 Modem Assembly: Status LEDs

Figure 3-6 PDU Status LEDs

Figure 5-1 Replacing the System Bezel

Figure 5-2 Replacing the Front Panel

Figure 5-3 Disconnecting a CPU-I/O Enclosure

Figure 5-4 Loosening the Front Release Levers on an Enclosure

Figure 5-5 Disengaging the Safety Lever on an Enclosure

Figure 5-6 Aligning the CPU-I/O Enclosure

Figure 5-7 Engaging the Release Levers on an Enclosure

Figure 5-8 Removing an Enclosure Cover

Figure 5-9 Replacing an Enclosure Cover

Figure 5-10 SAS and LED-Board Cables

Figure 5-11 Replacing the Plenum

Figure 5-12 Replacing the System Backplane Assembly

Figure 5-13 DIMM Slot Numbering in Single-Processor Systems (Front View)

Figure 5-14 DIMM Slot Numbering in Dual-Processor Systems (Front View)

Figure 5-15 DIMM Ejector Levers

Figure 5-16 Removing the PCIe adapter Bracket

Figure 5-17 Removing the PCIe adapter from the PCI Slot

Figure 5-18 Removing the PCI Bulkhead Bracket Screws

Figure 5-19 Removing the Bracket from the PCIe Riser Assembly

Figure 5-20 Removing an Adapter from the Connector on the PCIe Riser

Figure 5-21 Inserting a Full-Height Adapter into the PCIe Riser

Figure 5-22 Connecting the PCIe Riser Assembly

Figure 5-23 Replacing an Internal Disk Drive

Figure 5-24 Replacing a DVD Drive

Figure 5-25 Replacing the Modem Assembly

Figure 5-26 Removing the Metal Plate Over the Modem Connector

Figure 5-27 Replacing a PDU