Figure 1-1 ftServer 2600, 4500, 6300, and 6310 Systems

Figure 1-2 ftServer 2600, 4500, 6300, and 6310 Systems: Front View

Figure 1-3 ftServer 2600, 4500, 6300, and 6310 Systems: Rear View

Figure 1-4 CPU-I/O Enclosure: Interior Components, Model 2600

Figure 1-5 CPU-I/O Enclosure: Interior Components, Models 4500, 6300, and 6310

Figure 3-1 System Front Panel LEDs

Figure 3-2 CPU-I/O Enclosure LEDs and Buttons (Bezel Removed)

Figure 3-3 Hard Disk Drive LEDs

Figure 3-4 Ethernet and VTM Ports: Status LEDs

Figure 3-5 Modem Assembly: Status LEDs

Figure 3-6 PDU Status LEDs

Figure 5-1 Replacing the System Bezel

Figure 5-2 Replacing the Front Panel

Figure 5-3 Disconnecting a CPU-I/O Enclosure

Figure 5-4 Loosening the Front Release Levers on an Enclosure

Figure 5-5 Disengaging the Safety Lever on an Enclosure

Figure 5-6 Aligning the CPU-I/O Enclosure

Figure 5-7 Engaging the Release Levers on an Enclosure

Figure 5-8 Removing an Enclosure Cover

Figure 5-9 Replacing an Enclosure Cover

Figure 5-10 Replacing the Plenum

Figure 5-11 Replacing the System Backplane Assembly

Figure 5-12 DIMM Slot Numbering in Single-Processor Systems (Viewed from Front)

Figure 5-13 DIMM Slot Numbering in Dual-Processor Systems (Viewed from Front)

Figure 5-14 DIMM Ejector Levers

Figure 5-15 Replacing the CPU-I/O Enclosure Fan Assembly

Figure 5-16 Removing the Power Supply Fan

Figure 5-17 Replacing a Power Supply Fan

Figure 5-18 Removing the PCI Adapter Bracket

Figure 5-19 Removing the PCI Adapter from the PCI Slot

Figure 5-20 Removing the PCI Bulkhead Bracket Screws

Figure 5-21 Loosening the Captive Screw on the Motherboard

Figure 5-22 Removing the Bracket from the PCI Riser Assembly

Figure 5-23 Removing an Adapter from the Connector on the PCI Riser

Figure 5-24 Inserting a Full-Height Adapter into the PCI Riser

Figure 5-25 Replacing a Disk Drive

Figure 5-26 Replacing a DVD Drive

Figure 5-27 Replacing the Modem Assembly

Figure 5-28 Removing the Metal Plate Over the Modem Connector

Figure 5-29 Replacing a PDU