FiguresFigure 6-1 Rail Clearance
Figure 9-1 System Components
Figure 9-2 EIA Vertical Rail Hole Pattern
Figure 9-3 Numbering the Middle Hole of 6U
Figure 9-4 PDU Components
Figure 9-5 Cage Nut Locations: PDU
Figure 9-6 Inserting Cage Nuts
Figure 9-7 Installing the Lower PDU (at U Number 1)
Figure 9-8 Installing the Upper PDU (at U Number 2)
Figure 9-9 Screw Locations on the Rear Vertical Rails
Figure 9-10 Attaching the Mounting Brackets and Inserting Guide Screws (Rear View)
Figure 9-11 Removing the Front Panel from the Shelf Unit
Figure 9-12 Removing the System Backplane
Figure 9-13 Cage Nut Locations on Front Vertical Rails
Figure 9-14 Mounting the Shelf Unit on the Mounting Brackets
Figure 9-15 Securing the Shelf Unit to the Front Rails
Figure 9-16 Securing the Shelf Unit to the Mounting Brackets
Figure 9-17 Replacing the Front Panel in the Shelf Unit
Figure 9-18 Installing the CPU-I/O Enclosures in a Cabinet
Figure 9-19 Installing the Bezel
Figure 10-1 System Ports
Figure 10-2 Connecting Cables to the Modem
Figure 10-3 Mini-SAS (SFF-8088) Connector
Figure 10-4 Connecting a Tape Drive to an ftServer System
Figure 11-1 Connecting a System Directly to AC Power
Figure 11-2 Connecting a System to a UPS
Figure 11-3 Connecting the Systems Directly to PDUs
Figure A-1 ftServer 2900, 4900, or 6900 System: CPU-I/O Enclosures: Front View
Figure A-2 AAP87600PDU
Figure B-1 Star Ground Example
Figure B-2 PDU Power Input Labeling
Figure B-3 ftServer Enclosure Power Input Labeling
Figure B-4 Single-Phase 120V AC Circuit Connection
Figure B-5 Single-Phase 240V AC Circuit Connection
Figure B-6 Split-Phase 120/240 Volts AC Circuit Connection
Figure B-7 Three-Phase 208V AC, Y-, or D-Source Circuit Connection, Phase-to-Phase
Figure B-8 Three-Phase 380V AC, Y-, or D-Source Circuit Connection, Phase-to-Neutral
|
|